Main application field: Powerful contact adhesive with short open time and immediate load-bearing. For profiles, skirting as well as all common types of floor covering on absorbent and nonabsorbent substrates. UZIN WK 222 allows processing without solvent. For interior areas only. Suitable for / on: PVC soft skirting, stair profiles, coved skirting from PVC, linoleum, rubber flooring, for contact bonding All textile floor coverings, needle felt coverings or woven carpets, for contact bonding on stairs in block format or with protruding edge as well as for the bonding/covering of treads and risers PVC/CV floor covering, linoleum, rubber, insulating underlays, amongst others, for contact bonding on staircases and risers Impact absorbing wall coverings and suitable textile or composite floor covering for contact bonding on all substrates common to building construction on walls and ceilings Repair bonding work, e.g. seam restorations, inspection cover bonding, and others Heavy duty for residential, commercial, industrial and sports facility applications Hot water underfloor heating Heavy duty for chair castors according to DIN EN 12 529 Wet shampooing and spray extraction cleaning according to RAL 991 A2 Product benefits / Features: UZIN WK 222 is a strong and solvent-free contact adhesive with short open time allowing immediate loads. It can be used and applied like a solvent-based neoprene adhesive. For interior use. Superb rolling and brushing properties Can be applied one day in advance Long contact bonding time High resistance to plasticisers Solvent-free Great coverage. Correct consumption obtained when applied with the yellow foam roller (pictured). Please note this is sold separately. Technical data: Packaging: plastic bucket Pack size: 1kg, 6kg, 12 kg Shelf life: min 12 months Colour: beige Consumption: 300 - 450 g/m in total* Open time: 20 - 40 minutes* Contact bonding: min. 2 hours*, reduces to 90 minutes* if one adhesive side was applied the day before Ready for foot traffic: Immediately* Thermal stability: up to 70 C, depending on the type of floor covering and substrate Minimum application temperature: 15 C at ground level Loadable: immediately* Weld seams: after 12 hours* Final strength: after 2 days* At 20 C and 65% relative humidity
Brand
- Uzin
