Product Description EVERBUILD BLACK JACK 908 D.P.M. is an odourless rubber-enriched bitumen emulsion which provides a highly effective sandwich dampproof membrane for floors. Also acts as a waterproofer for walls, above ground structures and foundations. DPM is also suitable as an adhesive for wood block and mosaic panels, insulation boards, expanded polystyrene, cork and as a plaster bonding agent, even on difficult surfaces. Uses Commonly used in the following areas: Providing sandwich damp-proof membranes for floors. General waterproofing: - for use on concrete, fibre/cement, render, plaster etc. For waterproofing structures such as bridge abutments, retaining walls and culverts. For fixing wood blocks and wooden mosaic flooring. As a bonding agent for plastering difficult substrates such as glazed tiles. For fixing insulation boards, expanded polystyrene and cork slabs. As a curing agent for concrete. Characteristics / Advantages Forms an impervious water and water vapour barrier on most surfaces Internal or external use May also be used as an adhesive or bonding aid Low hazard - water clean up Application Temperature: +5C to +50C. DO NOT APPLY BELOW 5C Fire Resistance: Wet product = non flammable / Dry product = Will support combustion SBS Content: 14% w/w minimum Approvals / Standards Conforms to Clause 2004:4 Specification for Highway works Product Information Packaging: 5L & 25L tins Colour: Dries black Shelf life: 24 months from date of manufacture when stored according to manufacturers instructions Storage Conditions: Store in original container in cool (5C - 25C) dry conditions, PROTECT FROM FROST. Density: ca. 1.0 g/cm3 @ 20C Chemical Resistance: Resistant to: most salt solutions, dilute acids and alkalis, water. / Not resistant to: oils, solvents and some detergent solutions. Services Temperature: -10C to +85C. Yield: 6 10m / 5L tin as approximation Dyring time: 4 -6 hours depending on drying conditions
Brand
- Sika Everbuild
