Product description Can be used internally and externally and provides a high strength, impact resistance bond that is usually stronger than the wood itself. Ideal for all general woodworking and joinery uses, furniture assembly and household DIY use. Dries clear. Fast cure, initial set in just 10 minutes. Uses As a weatherproof/creep resistant wood adhesive, internally and externally. Characteristics / advantages Excellent rate of bond strength development. High degree of water resistance. D3 Classification. Interior/exterior use. Low timber staining characteristics - will not stain. Dries clear - contains no inert fillers. Water based - environmentally friendly/easy clean up. Suitable for radio frequency cure. Product information Packing: Bottles: various sizes up to 1L / Jerry cans: 5L & 25L / Larger scale: Drum & IBC Colour: Dries clear Shelf life: 12 months Storage conditions: To ensure safe storage, containers should be well sealed to prevent evaporation of water and the formation of skin on the surface. Store at a temperature above freezing. A temperature of 5-25C is recommended. Higher temperatures will affect quality and cause the formation of crusts and skins; especially if the containers are not tightly closed or are subjected to direct sunlight for long periods. During storage, slight separation may occur. (thin layer above thicker layer) this is an aesthetic rather than technical problem. In this case, mix well before applying. If these conditions cannot be met, please refer to the technical department for advice. Density: 1.0-1.2 g/cm3 (dispersion) Solid content by weight: 45-50% Thermal resistance: Stable (4 week @ 50C)
Brand
- Sika Everbuild
