Features: Rewmar MS Polymer is a one part, modified silane based flexible wood flooring adhesive. It is suitable for sticking down any species of wooden flooring to almost any subfloor. When dry it has a high bond strength between the wooden floor and the subfloor but remains permanently flexible. This allows the flooring to move as the seasons change but it will not crack, and the floor will stay adhered to subfloor. If any adhesive is left on the surface of the wood it is easy to remove either wet or dry (following day) and no special chemicals are required. Smaller pack size only 6kg of adhesive open at a time Environmentally friendly recyclable aluminium and cardboard packaging Less waste no more split tubs New formula Faster, Stronger Must be applied using 6mm V notch trowel. Technical data: Base: MS Polymer Curing system: Moisture curing Consistency: Paste Colour: Beige or Pale brown Specific gravity: approx. 1.6 (g/cm) Viscosity (mPas): Approx. 72.000 (HBT A/10) Open time*: Approx. 20-30 minutes** Adjustability time*: Approx. 20-30 minutes** Set to load bearing: min 12 hrs Sanding/Finishing: min 12 hrs Shear strength: EN17178:2020 >1.0N/mm Temperature resistance: -40C to +90C (cured) Durability: Good Total solids content: 100% solvent free Application rate: Depending on subfloor 1000 - 1200 gr/m by use 6mm V notch trowel 600 800 gr/m by use 3mm V notch trowel * at 21C and 50% rv ** This can vary according to environmental circumstances such as temperature, humidity, substrate etc. Characteristics: One component Ready to use and easy to apply Solvent free Water free Free of isocyanates Forms stable peaks once applied by a notched trowel or spreader comb Rapid build up of bond strength Rapid curing High final bond strength Permanently Elastic Suitable for underfloor heating Dissipates shear forces Easy to remove residues on flooring No hazard labelling required
Brand
- Rewmar
