Where to use Bonding solid wooden floors or pre-finished multy-layered wooden floors of all types and formats. Some application examples Ultrabond Eco S955 1K is used for bonding pre-finished wooden floors, lamparquet, slats, floor-boards and all types of parquet on: cementitious screeds, screeds made using Mapecem, Mapecem Pronto, Topcem, Topcem Pronto and similar products, old wooden floors, ceramic, marble, terrazzo, etc. and anhydrite screeds. It is also suitable for heated substrates. Technical Characteristics Ultrabond Eco S955 1K is a one-component, sililated polymer-based adhesive without water, solvents (according to TRGS 610), with a very low emission level of volatile organic compounds (EMICODE EC1 Plus). It is manufactured according to a technology developed in MAPEIs own research laboratories and has the following characteristics: one-component, ready-to-use product; no catalyser is required, therefore no mixing. If stored correctly, remaining quantities of the product may be used again at a later date; GEV certified, as a product with a very low emission level of volatile organic compounds (EMICODE EC1 Plus); compatible with Ultracoat water based varnishes and bases and the oils from the Ultracoat range; no hazard or risk statements or symbols; easy to apply with excellent ridge holding; 20-30% more yield compared with conventional two-component adhesives, thanks to its low viscosity and free-flowing properties when applied by trowel; totally free of solvents (according to TRGS 610); easy to remove from pre-finished elements. Recommendations Before installation starts, doors and windows should be installed. The humidity level in the screed must be compliant with that prescribed by the current standards for the installation of wood, and as indicated in the technical data sheet for the parquet. If the substrate is not thoroughly dried, or if the residual humidity is higher than the level prescribed, we recommend the use of a suitable waterproofing primer, such as Eco Prim PU 1K, Primer MF, etc. If there is a risk of rising damp, a vapour barrier must be installed before laying the screed. Do not use Ultrabond Eco S955 1K if the temperature is lower than +10C or higher than +35C. When transported over long distances, thermally insulated containers may be required. Set to light foot traffic: Floors may be walked on after approx 12 hours Polishing: The floor may be polished after 3 days. Residual adhesive on the surface of the floor may be easily removed by using cleaner L Cleaning: Ultrabond Eco S955 1K may be removed using Cleaner L or other special cleaning solutions while still fresh. Once hardened, it must be removed mechanically of with Pulicol 2000. Consumption: 800-1200 g/m. Packaging: 15 kg plastic drums. Storage: 12 months in its original, well-sealed container stored under normal conditions.
