Where to use Suitable for installing all types of multi-layer, pre-finished wood flooring and medium size planks of solid wood up to 15cm wide. Some application examples: Ultrabond Eco S948 1K is used for bonding multi-layer pre-finished wood flooring on: cementitious screeds, screeds made using Mapecem, Mapecem Pronto, Topcem, Topcem Pronto and similar products, old wooden floors, ceramic, marble, terrazzo, etc. and anhydrite screeds. It is also suitable for heated substrates. Technical Characteristics Ultrabond Eco S948 1K is a one-component, silylated polymer-based adhesive without water, solvents (according to TRGS 610), amines and epoxy resin, with very low emission level of volatile organic compounds (EMICODE EC1 Plus). It is manufactured according to a technology developed in MAPEIs own research laboratories and has the following characteristics: one-component, ready-to-use product; no catalyst is required, therefore no mixing. If stored correctly, remaining quantities of the product may be used again at a later date; GEV certified, as a product with very low emission level of volatile organic compounds (EMICODE EC1 Plus) and Blauer Engel; no hazard or warning signs or messages; easy to apply with excellent ridge holding; 20-30% more yield compared with conventional two-component adhesives, thanks to its low viscosity and free-flowing properties when applied by trowel; totally free of solvents (according to TRGS 610); easy to remove from hands and pre-finished elements; compatible with Ultracoat Oil and with the water-based lacquers and undercoats of Ultracoat line Recommendations Before installing, make sure the rooms have suitable windows and fittings. The humidity level in the screed must be compliant with that prescribed by the current standards for the installation of wood, and as indicated in the technical data sheet for the parquet flooring. If the substrate is not thoroughly dried, or if the residual humidity is higher than the level prescribed, we recommend the use of a suitable waterproofing primer, such as Eco Prim PU 1K, Primer MF, Primer MF EC Plus, etc. If there is a risk of rising damp, a vapour barrier must be installed before laying the screed. Do not use Ultrabond Eco S948 1K if the temperature is lower than +10C or higher than +35C. When transported over long distances, thermally insulated containers may be required. Set to light foot traffic: Floors may be walked on after approx 12 hours. Polishing: The floor may be polished after 3 days. Cleaning: Ultrabond Eco S948 1K may be removed from floors using cleaner L or other special cleaning solutions while still fresh. One hardened, it must be removed mechanically. Consumption: 800-1200 g/m Packaging: 15 kg plastic drums. Plastic drums containing two 7 kg aluminium bags. Plastic drums containing one 7 kg aluminium bag. Storage: 12 months in its original, well sealed container stored under normal conditions.
